Workabout Pro G3

Products (Total Items: 30)
Sort by
Backup Battery
$6.75
Compatible with LONG configurations with the EXTENDED battery.
$16.50
Compatible with LONG configurations with the STANDARD battery.
$14.50
Replacement battery door for Workabout Pro 3 & 4. Compatible with SHORT configurations with the EXTENDED battery.
$14.50
Replacement battery door for Workabout Pro 3 & 4. Compatible with SHORT configurations with the STANDARD battery.
$14.50
$74.00
Stylus Cord, 5-Pack for Honeywell 9900
$9.50
Cable, DEX / DB9
$19.00
DEX cable provides connectivity to any short and long configurations through the tether port. Compatible with Zebra Psion Teklogix Workabout G3 and G4, WAP3 WAP4 computers.
$22.50
Digitizer touch panel for LCD Sharp model number LS037V7DW01 and LS037V7DW03. Includes adhesive. Works with Psion Teklogix Workabout Pro G2 7525s 7527s, Workabout Pro G3 & EP10 7515
$11.50
Psion Workabout Pro G3 display module. Compatible with all G3 units (7527C-G3, 7527S-G3). Module includes all components seen in photos.
$55.00
Replacement bezel for Psion Workabout PRO G3 display. Compatible for all G3 models: 7527-C, 7527-S.
$20.00
New end cap 1D Lorax Laser Kit grip for Psion Motorola Zebra Workabout pro G3 G4. Works with all short and long versions.
$130.00
Replacement extended endcap for Psion Symbol Workabout PRO. Psion P/N: 1051230 Plastic End Cap for GSM Multi-Purpose MFG Kit Assembly.
$14.75
Replacement RFID End Cap for Workabout Pro 3 & Pro 4. 7527-S, 7527-L, 7528-S, 7528-L
$110.00
$24.50
Hand strap with stylus (double loop) for short configurations. The snap-on closing allows quick access to the battery compartment. The double loop allows to adjust length of the handstrap to units with attached scanner/imager. Two sleeves for holding styluses.
$9.50
Psion Workabout PRO G3 Compatible for all G3 long models: 7527-C. Module includes all components seen in photos.
$65.00
New Keypad Assembly for long Psion Motorola Zebra Workabout pro G3 G4.
$45.00
New Keypad Assembly for numeric short version. Psion Motorola Zebra Workabout pro G3 G4.
$32.00
Technical Specs: Sharp 3.7" VGA LCD Display LS037V7DW01 Touch Screen
$44.00
Metal Frame P-DW01 + P-DW05
$2.85
New Pistol grip for Psion Motorola Zebra Workabout pro G3 G4.
$34.50
$4.50
New scan button set for left and right scan keys. Compatible for all Workabout models except 7525S-G1 units. Set includes left and right keys with adhesive. Psion Art.No.: 1050948-100 "PCB ASSY SCN GREY BTN SVC KIT".
$7.50
LONG GRAY STYLUS PACK OF 3. NOT COMPATIBLE WITH LOW PROFILE PISTOL GRIP.
$6.50
Sync / Charge Connector
$29.75
Trigger board for SE1524-ER,1D Lorax extended range laser end cap. Trigger board WA9301 is always required when using WA9022 Lorax laser end-cap with or without pistol grip.
$55.00
$17.50
Workabout PRO power supply with Tether adapter. AC Adapter 110-240V plus Tether Cable - 7525. Power AC Cord is NOT included. Compatible for all Workabout Pro models.
$22.50
There are no products to list in this category.
Continue Shopping

Customer Service available Mon - Fri 9am - 5pm EST

Contact us: [email protected] or Give us a call: 1-800-213-1973

Comodo SSL

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.